AUTOWATCH - GHOST 2 - MANCHESTER - GREATER MANCHESTER
AUTOWATCH - GHOST 2 - MANCHESTER - GREATER MANCHESTER
The Ghost is a unique, next generation device that secures your vehicle without the need for cutting wires or adding after-market key fobs. The device is connected to the vehicles CAN data network and a personalised PIN code is programmed into the Ghost using buttons on the dash and steering wheel.
ADVANTAGES
Engine start blocking: The Ghost will prevent the starting of the engine unless the unique, user defined PIN code has been entered first.
Undetectable using diagnostics: A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The Ghost has no circuit cuts so it cannot be found using these methods.
No radio frequency signals: Thieves cannot use sophisticated RF scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.
Advantages of using the CAN data network: The use of the CAN data bus has several advantages including low risk during installation, low probability of detection, and allows for placement almost anywhere in the vehicle.
Silent operation: Because the unit communicates with the ECU on the data bus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of a traditional immobiliser relay.
Stops key cloning and ECU swapping: A thief cannot simply add a new key or replace an ECU to bypass the Ghost and start the vehicle. Only a correct PIN code will allow the engine to start.
Tested for each vehicle: Due to the nature of the data bus communication the Ghost has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the Ghost.
Weatherproof tiny device: The Ghost is sealed and so small it can be installed and wrapped into the vehicle harness anywhere in the vehicle making it near impossible for a thief to find.
Emergency PIN code override: If the PIN code is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.
Service / Valet mode: Service mode allows your vehicle to temporarily start and drive without requiring the PIN code. The Ghost will exit service mode based on speed and time or by simply entering the PIN code.
Simple PIN code change process: At any time you can easily change the PIN code. Only you will know the unique PIN code for your vehicle
Uses the vehicle?s original buttons to enter the PIN code: The buttons in modern vehicles send data all around the vehicle which allows us to detect many different keys being pressed without extra wiring.
ADVANTAGES
Engine start blocking: The Ghost will prevent the starting of the engine
unless the unique, user defined PIN code has been
entered first.
Undetectable using diagnostics:
A modern thief can use diagnostics to detect circuit
cuts on modern vehicles. The Ghost has no circuit
cuts so it cannot be found using these methods.
No radio frequency signals:
Thieves cannot use sophisticated RF scanning, code
grabbing technology to detect what security device
your vehicle has when it does not transmit any
signals like conventional security systems.
Advantages of using the CAN data network:
The use of the CAN data bus has several advantages
including low risk during installation, low probability
of detection, and allows for placement almost
anywhere in the vehicle.
Silent operation:
Because the unit communicates with the ECU on the
data bus to immobilise the vehicle there is no way a
thief could listen for the tell-tale clicking of a
traditional immobiliser relay.
Stops key cloning and ECU swapping:
A thief cannot simply add a new key or replace an
ECU to bypass the Ghost and start the vehicle. Only
a correct PIN code will allow the engine to start.
Tested for each vehicle:
Due to the nature of the data bus communication the
Ghost has been adapted and tested for every vehicle
we list as compatible. If we list your vehicle you can
be sure we have thoroughly tested its operation with
the Ghost.
Weatherproof tiny device:
The Ghost is sealed and so small it can be installed
and wrapped into the vehicle harness anywhere in
the vehicle making it near impossible for a thief to
find.
Emergency PIN code override:
If the PIN code is forgotten, the car is sold or a button
is broken there is a secure, unique reset code for
each device.
Service / Valet mode:
Service mode allows your vehicle to temporarily start
and drive without requiring the PIN code. The Ghost
will exit service mode based on speed and time or by
simply entering the PIN code.
Simple PIN code change process:
At any time you can easily change the PIN code. Only
you will know the unique PIN code for your vehicle
Uses the vehicles original buttons to enter
the PIN code:
The buttons in modern vehicles send data all around
the vehicle which allows us to detect many different
keys being pressed without extra wiring.
Please contact the office on 0161 370 4751 to check availability.
[ ? ]
Autowatch Ghost 2 Autowatch Ghost 2
Autowatch Ghost 2
Autowatch Ghost 2




